Chapter 6 Maintenance
6-8
For more information, see Section 4-5-2 “Setting the Time Code” (page 4- 27).
3 Set the F-RUN/SET/R-RUN switch to R-RUN.
4 Press the VTR START button, and check that the tape starts and that the counter indication changes.
5 Press the VTR START button again, and check that the tape stops and that the counter indication also stops changing.
Set the time code.
2
Set the user bits as required.
For more information, see Section 4-5-1 “Setting the User Bits” (page 4-25).
1
Checking the functions of the user bits and time code
6
Alternatively, with a single microphone, check each channel in turn.
Aim the microphones at a sound source.
Set the AUDIO IN switches to REAR.
3
4
5 Check that the audio level meter in the display panel and the audio level indication in the viewfinder reflect the changing sound level.
1 Set the LINE/MIC selectors to MIC.
2 Connect external microphones to the AUDIO IN CH-1/CH-2 connectors.
Testing external microphones
5

6