5 Press the MENU CANCEL/PRST/ITEM switch toward the ITEM position (or use the rotary encoder), to advance the cursor to the next position, then return to step 4 to make the next on/off setting.

6 To exit from the menu, return the MENU ON/OFF/PAGE switch to the OFF position.

The setup menu disappears from the viewfinder screen.

4 To carry out superimposed recording

To actually record the items selected for superimposed recording in the SHOT DATA DISP page, set the OUTPUT switch to BARS, DCC OFF. The items selected for superimposed recording appear in the viewfinder screen and are recorded superimposed on the picture.

4-8-6 Setting the Shot ID

In the SHOT ID page of the setup menu, you can set a shot ID, of up to 12 alphanumeric characters, spaces, and symbols.

When the OUTPUT switch is set to BARS, DCC OFF, this shot ID is output with the color bar signal. The shot ID comprises ID1 to ID4, and the setting can be changed using the SHOT DATA DISP page of the setup menu.

Notes

•To display the shot ID, set the TEST OUT item in the FUNCTION 1/2 page of the setup menu to ENC, and make the signal output from the TEST OUT connector a composite signal.

For information about the TEST OUT page, see Section 4-9-3 “Selecting the Test Output” (page 4-80).

•When the setup menu is displayed, the shot ID is not displayed even if the color bar signal is output.

4-66Chapter 4 Adjustments and Settings for Recording