2 Press the rotary encoder.

The currently set card ID appears. If no card ID is currently set, 10 spaces (π) appear. The cursor is at the left-most character or space.

 

 

 

 

 

 

 

 

∗∗∗ SETUP CARD ∗∗∗

 

 

 

READ (mCAM)

 

 

 

 

WRITE (mCARD)

 

4

 

 

m ID EDIT

 

 

 

µ

 

 

 

ID :

 

 

 

 

 

Currently set card ID,

 

 

 

 

or 10 spaces

 

 

 

 

 

 

 

 

 

 

 

3 Turn the rotary encoder clockwise as seen from the front of the

 

 

camera until the character you wish to set appears.

 

 

The character display cycles from the alphabet, through the symbols,

 

 

and the digits in that order. Turn the rotary encoder

 

 

counterclockwise to cycle through the characters in the reverse

 

 

direction.

4 Press the rotary encoder to advance the cursor to the next position.

When the settings are completed, press the rotary encoder repeatedly until the cursor reaches the rightmost position.

To set another character, return to step 3.

When 10 characters are set, EDIT mode is exited automatically.

4-112Chapter 4 Adjustments and Settings for Recording