5-1 Power Supply

You need to power on the camcorder for the flange focal length adjustment, viewfinder focus and screen adjustment, etc., which are described later.

The following power supplies can be used with the camcorder.

•A BP-L60/L90 lithium-ion battery pack

•An NP-1B or a BP-90A Ni-Cd battery pack

•AC power using AC-550/550CE or AC-DN1

Alternatively, you can make combined use of internal and external batteries, by mounting one of the above batteries as an internal battery and connecting an external battery that can be a BP-90A contained in a DC-210 Battery Adaptor and connected to the DC IN connector of the camcorder.

5-1-1 Using a BP-L60/L90 Battery Pack

With a battery pack, the camcorder will operate continuously for the time listed in the table below.

Approximate continuous operating time with BP-L60/L90 Battery Pack

 

DNW-7/7P

DNW-90/90P

DNW-90WS/90WSP/9WS/

 

 

 

9WSP

 

 

 

 

BP-L60

120 minutes

110 minutes

105 minutes

 

 

 

 

BP-L90

180 minutes

165 minutes

160 minutes

 

 

 

 

Before use, charge the battery pack with a BC-L100/L100CE Battery Charger. It takes about 2.5 hours to charge one BP-L60, and about 3.5 hours to charge one BP-L90.

For more information, refer to the BC-L100/L100CE manual.

Note on using the battery pack

A warm battery pack may not be able to be fully recharged.

Chapter 5 Setting Up the Camcorder 5-1

5

Camcorder the Up Setting