2 Press the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST.
The character below the character position cursor disappears, and is replaced by a space (π).
3 (1) To delete another character, press the rotary encoder repeatedly until the cursor is at the position of the character to be deleted.
4 | (2) Return to step 2 to delete the character. |
| |
| |
| Information |
| In the setup menu OPERATION MODE 2/2 page, you can select |
| information to be displayed in the viewfinder and output from the TEST |
| OUT connector. |
| Use the following procedure. |
| 1,2,5 |
| 2,3,4 |
| 3 |
| Settings to select whether or not to display or output time code and so forth |
| 1 Set the MENU ON/OFF/PAGE switch to ON. |