∗∗∗ MASTER GAIN ∗∗∗

mLOW : 0dB

MID : 9dB

HIGH : 18dB

TURBO : 36dB

Gain corresponding to

L position of GAIN selector

Gain corresponding to

M position of GAIN selector

Gain corresponding to

H position of GAIN selector

Gain corresponding to TURBO 4 GAIN button selection

MASTER GAIN page (factory settings)

3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM until the cursor reaches the desired position (LOW, MID, HIGH or TURBO) (or use the rotary encoder).

4 Press the rotary encoder, to display a question mark to the left of the display.

5 Turn the rotary encoder to display the gain value you wish to select.

Any of −3, 0, 3, 6, 9, 12, 18, 24, 30, 36,or 42 dB can be set for each of the L, M, and H positions, in any sequence.

For TURBO, any of –3, 0, 3, 6, ..., 30, 36 , 42 dB 1) can be selected. Press the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST to reset the gains to the factory set values (L = 0 dB, M = 9 dB, H = 18 dB, and TURBO = 36 dB).

To change the gain corresponding to another switch position, return to step 3.

(Continued)

....................................................................................................................................

1)Video gain boosted from 30 dB to 36 or 42 dB by combining blocks of 2 or 4 adjacent pixels of the CCD.

Chapter 4 Adjustments and Settings for Recording 4-75