If you turn off the power during a recording pause
Follow the procedure below to continue recording.
3
2 1 3
Continuous recording after turning off the power during a recording pause
1 Turn on the power again.
2 Press the RET button on the lens. (Make sure that CAM RET. is set to OFF on the FUNCTION 2/2 page of the setup menu.
For more information, see Section
The camcorder positions the tape at the appropriate point. Note, however, that this function works only for continuously recorded material or consecutively joined segments totaling at least 4 seconds in length.
3 Press the VTR START button on the camcorder or the VTR button on the lens to start recording.