Testing the viewfinder
1 Adjust the position of the viewfinder.
2 Check that the color bars are displayed in the viewfinder, and adjust the BRIGHT, CONTRAST, and PEAKING controls to give the best color bar display.
3 (1) Set the MENU ON/OFF/PAGE switch to ON and check that the setup menu is displayed on the viewfinder screen.
(2)Push the MENU ON/OFF/PAGE switch to PAGE and check that the setup menu page changes to the next page.
(3)Push the MENU CANCEL/PRST/ITEM switch to ITEM and check that the cursor moves within the current page.
(4)Turn the rotary encoder and check that the setting value or ON/
OFF indication of the item selected by the cursor changes. | 6 |
| |
4 After once setting the MENU ON/OFF/PAGE switch to OFF, set the |
|
OUTPUT/DCC selector to CAM, and change the FILTER selector |
|
position in the sequence of 1, 2 , 3, 4. Check that the FILTER |
|
indicator on the viewfinder screen displays the correct numbers. |
|
5 Check each of the following operations, and make sure that the indicator lights if the corresponding item has been turned on in the ‘!’ LED page.
(1)Set the gain to anything but 0 dB by the GAIN selector and on the MASTER GAIN page of the setup menu.
(2)Set the SHUTTER selector to ON.
(3)Set the WHITE BAL switch to PRST.
(4)Use the lens extender.
(5)Set the
(6)Set the iris to automatic mode, and turn the rotary encoder to change the reference value to other than the standard value.
(Continued)
Chapter 6 Maintenance |