4-8-4 Setting the Marker Display

Use the MARKER 1/2 page of the setup menu to switch the display of the center and safety zone markers on or off and to select whether the area indicated by the safety zone marker is 80%, 90% or 100% of the screen area.

Setting the marker display

Follow the procedure below to set details of the marker display.

4

1,2,5

2,3,4

3

Setting the marker display

1 Set the MENU ON/OFF/PAGE switch to ON.

The page that was on the screen when the last menu operation ended appears on the viewfinder screen. (When this menu is first used, the lowest-numbered one of the currently selected pages appears.)

2 Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until the MARKER 1/2 page shown on the next page appears (or use the rotary encoder).

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-61