∗∗∗ SETUP CARD ∗∗∗

mREAD (mCAM) WRITE (mCARD)

ID EDIT

ID : .........

READ? (Y : PRESS)

4

5 • To end reading data, push the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST.

• To continue the reading of data, go on to step 6.

Notes

•The data and the card ID read from the card overwrite the data stored in the camcorder. Before going on to step 6, re-check the card ID and decide whether it is necessary to read the data and card ID from the card.

•The card stores data for both user-mode settings and engineer- mode settings. Both sets of data are read and written together.

For more information, refer to the Maintenance Manual.

•There is no setup card read-write compatibility between different models of digital camcorder. For example, a card written by the DNW-7 cannot be read by the DNW-90 or DNW-7P, and vice versa.

6 Press the rotary encoder once more.

While data is being read, the message “READING DATA!” is displayed.

When reading is completed, the message “READ : OK” appears.

4-110Chapter 4 Adjustments and Settings for Recording