∗∗∗ SETUP CARD ∗∗∗
READ (mCAM)
mWRITE (mCARD)
ID EDIT
ID : 
.........
WRITE ? (Y : PRESS)
4
5 • To end writing data, push the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST.
• To continue the writing of data, go on to step 6.
6 Press the rotary encoder.
The displayed card ID and the setting data stored in the camcorder are written to the card.
While the data is being written, the message “WRITING DATA!” is displayed.
When the writing is completed, the message “WRITE : OK” appears.
7 To end the menu operation, set the MENU ON/OFF/PAGE switch to OFF.
The setup menu disappears from the viewfinder screen and the displays indicating the current status of the camcorder appear along the top and bottom of the viewfinder.
Chapter 4 Adjustments and Settings for Recording