
ISO sensitivity. Change the ISO value to your desired setting if necessary.
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
The (SteadyShot warning) indicator does not appear in manual exposure mode. The brightness of the image on the monitor may differ from the actual image being shot.
[23] How to Use Shooting
Memory recall
Selecting a shooting mode
Allows you to shoot an image after recalling
1.Set the mode dial to 1 or 2 (Memory recall).
2.Press on the center of the control button.
Note
Register shooting settings in advance by [Memory].
If you set [Memory recall] after completing the shooting settings, the registered settings are given priority and the original settings may become invalid. Check the indicators on the screen before shooting.
[24] How to Use
Movie
Shooting
Selecting a shooting mode
You can adjust the shutter speed or aperture value to your desired settings for recording movies. You can also check the image angle before shooting.
1.Set the mode dial to (Movie).
2.MENU → (Camera Settings) → [Movie] → desired setting.
When [Mode Dial Guide] is set to [On], you can select the desired settings after you have changed the position of the mode dial.
3. Press the MOVIE button to start recording.