3.Check the composition of the image on the smartphone screen, and then press the shutter button (A) on the smartphone to shoot an image.

Use button (B) to change settings such as [EV], [Self-Timer] and [Review Check].

Note

This product shares the connection information for [Smart Remote Embedded] with a device that has permission to connect. If you want to change the device that is permitted to connect to the product, reset the connection information by following these steps. MENU → (Wireless) → [SSID/PW Reset]. After resetting the connection information, you must register the smartphone again.

Depending on future version upgrades, the operational procedures or screen displays are subject to change without notice.

[144] How to Use

Using Wi-Fi functions

Controlling this product using a Smartphone

One-touch connection with an NFC-enabled Android smartphone (NFC One-touch remote)

You can connect this product and an NFC-enabled Android smartphone with one touch, without performing a complex setup operation.

1.Activate the NFC function of the smartphone.

2.Switch this product to shooting mode.

The NFC function is available only when the (N mark) is displayed on the screen.

3. Touch the product to the smartphone.

Page 119
Image 119
Sony DSC-HX400, HX400V manual