When you use [Multi Frame NR], it takes some time for the product to perform the overlay processing of images.

Hint

You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting. Select [ISO AUTO] and press the right of the control button, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi Frame NR].

[62]How to Use Using shooting functions

Multi Frame NR

Selecting the ISO sensitivity

The product automatically shoots multiple images continuously, combines them, reduces the noise, and records them as one image. With multi frame noise reduction, you can select larger ISO numbers than the maximum ISO sensitivity. The image recorded is one combined image.

1.MENU → (Camera Settings) → [ISO] → [Multi Frame NR].

2.Press the right button on the control button to display the setting screen, then select a desired value using the up/down button.

Note

The flash, [D-Range Opt.], and [Auto HDR] cannot be used.

You cannot set [Multi Frame NR] in [Picture Effect].

Hint

You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting. Select [ISO AUTO] and press the right button, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi Frame NR].

[63]How to Use Using shooting functions

D-Range Opt. (DRO)

Correcting the brightness or contrast

By dividing the image into small areas, the product analyzes the contrast of light and shadow

Page 67
Image 67
Sony DSC-HX400, HX400V manual Multi Frame NR, Range Opt. DRO