[31] How to Use Using shooting functions

Flash Comp.

Using the flash

Adjusts the amount of flash light in a range of –2.0 EV to +2.0 EV.

Flash compensation changes the amount of flash light only. Exposure compensation changes the amount of flash light along with the change of the shutter speed and aperture.

1.MENU → (Camera Settings) → [Flash Comp.] → desired setting.

Selecting higher values (+ side) makes the flash level higher, and lower values (– side) makes the flash level lower.

Note

The higher flash effect may not be visible due to the limited amount of flash light available, if the subject is outside the maximum range of the flash. If the subject is very close, the lower flash effect may not be visible.

[32] How to Use

Using shooting functions

Selecting a screen display mode

Switching the screen display (Shooting)

You can change the display contents on the screen.

1.Press the DISP (Display Setting) button.

Each time you press the DISP button, the recording information display changes as follows:

Graphic Display → Display All Info. → No Disp. Info. → Histogram → Level → Graphic Display

Graphic Display

Display All Info.

Page 48
Image 48
Sony HX400V, DSC-HX400 manual Flash Comp, Switching the screen display Shooting