Sony DSC-HX400, HX400V manual Demo Mode

1. MENU → (Setup) → [PAL/NTSC Selector] → [Enter]

Note

This function is provided with 1080 50i-compatible devices only. It is not provided with 1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i” mark on the bottom of the product.

If you insert a memory card that has previously been formatted with the PAL system, a message telling you that you must re-format the card appears. When you record using the NTSC system, re-format the memory card or use another memory card.

When the NTSC mode is selected, the “Running on NTSC.” message always appears on the start-up screen each time you turn the product on.

[122] How to Use Changing settings

Demo Mode

Setup menu

The [Demo Mode] function displays the movies recorded on the memory card automatically (demonstration), when the camera has not been operated for a certain time.

Normally select [Off].

1. MENU → (Setup) → [Demo Mode] → desired setting.

Menu item details

On:

The movie playback demonstration starts automatically if the product is not operated for about one minute. Only protected AVCHD movies are played back.

Set the view mode to [AVCHD View], and protect the movie file with the oldest recorded date and time.

Off (default setting):

Does not show the demonstration.

Note

You can set this item only when the product is powered by the AC-UD10/AC-UD11 AC Adaptor (sold separately).

Even if [On] is selected, the product does not start a demonstration if there is no movie file on the memory card.

When [On] is selected, the product does not switch to power save mode.