that works with the smartphone, the product and the smartphone will be connected via Wi-Fi. To use this function, register the desired application in advance.

1.MENU → (Wireless) → [One-touch(NFC)] → desired application.

2.Switch this product to shooting mode, then touch an NFC-enabled smartphone to the (N mark) on the product for 1-2 seconds.

PlayMemories Mobile launches on the smartphone, and the application you have registered launches on this product.

Note

When the product is in playback mode, the registered application will not launch even if you touch the smartphone to the product.

When you call up an application with one touch, even if that application does not work with a smartphone, PlayMemories Mobile on smartphone will launch. Exit PlayMemories Mobile without performing an operation. If you do not exit PlayMemories Mobile, the smartphone stays in standby connection status.

[143]How to Use Using Wi-Fi functions

Smart Remote Embedded

Controlling this product using a Smartphone

You can use a smartphone as the remote controller for this product, and shoot still images. Still images shot via remote control are sent to the smartphone from the product. The application PlayMemories Mobile must be installed on your smartphone.

1.MENU → (Application) → [Application List] → [Smart Remote Embedded].

2.When the product is ready for the connection, an information screen appears on the product. Connect the smartphone and the product using that information.

Connection setting methods differ among smartphones.

Page 118
Image 118
Sony HX400V, DSC-HX400 manual Smart Remote Embedded