Shoots three images, each with different color tones according to the selected settings of white balance, color temperature and color filter.

1. MENU → (Camera Settings) → [Drive Mode] → [WB bracket].

Note

The last shot is shown on the Auto Review.

[61] How to Use

ISO

Using shooting functions

Selecting the ISO sensitivity

Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity.

1. MENU → (Camera Settings) → [ISO] → desired setting.

Menu item details

Multi Frame NR

Combines continuous shots to create an image with less noise.

ISO AUTO (default setting):

Sets the ISO sensitivity automatically.

80 / 100 / 125 / 160 / 200 / 250 / 320 / 400 / 500 / 640 / 800 / 1000 / 1250 / 1600 / 2000 / 2500 / 3200:

You can reduce image blurring in dark locations or with moving subjects by increasing the ISO sensitivity (select a larger number).

Note

[ISO AUTO] is selected when using the following functions:

[Intelligent Auto] [Superior Auto] [Scene Selection] [iSweep Panorama]

The higher the ISO value, the more noise will appear on the images.

The [ISO AUTO] setting is not available for [Manual Exposure]. If you change the exposure mode to [Manual Exposure] while set to [ISO AUTO], the ISO value is switched to the lowest value. Set the ISO in accordance with the shooting conditions.

Page 66
Image 66
Sony HX400V, DSC-HX400 manual Multi Frame NR:, ISO Auto default setting