Menu items in the 700s, relating to video control

Item number

Item name

 

 

Settings

713

VIDEO SETUP REFERENCE

 

Set the video setup amount to be added to the composite output signal (in

 

LEVEL

 

 

59.94i mode only).

 

 

 

 

 

 

 

Sub-item

 

 

 

 

 

 

 

 

 

 

OUTPUT

In 59.94i mode

 

Add the setup level selected by this item to the output signal.

 

LEVEL

(UC)

 

0.0%, 7.5%

 

 

 

 

 

 

In 59.94i mode (J)

Add the setup level selected by this item to the output signal.

 

 

 

 

0.0%, 7.5%

 

 

 

 

 

715

VIDEO GAIN CONTROL

 

Adjust the video output level.

 

 

 

 

–2048 to 0 to 848

 

 

 

 

716

CHROMA GAIN CONTROL

 

Adjust the chroma output level.

 

 

 

 

–2048 to 0 to 848

 

 

 

 

717

CHROMA PHASE CONTROL

 

Adjust the chroma phase.

 

 

 

 

–128 to 0 to 127

 

 

 

 

718

SETUP LEVEL (59.94i mode)/

 

Adjust the setup level (black level).

 

BLACK LEVEL (50i mode)

 

–272 to 0 to 272

 

 

 

 

719

SYSTEM PHASE SYNC

 

Adjust the output signal sync phase.

 

 

 

 

–128 to 0 to 127

 

 

 

 

720

SYSTEM PHASE SC

 

Adjust the output signal subcarrier phase.

 

 

 

 

0 to 511

 

 

 

 

726

H BLANKING WIDTH

 

Select the horizontal blanking width of the output analog video signal.

 

 

 

 

narow (narrow): Digital blanking (narrow)

 

 

 

 

wide: Analog blanking (wide)

 

 

 

 

When “wide” is selected, the horizontal blanking width complies with

 

 

 

 

RS170A, and normally the blanking is widened and the image becomes

 

 

 

 

narrower. It is recommended to select “narow” at the editing stage, then

 

 

 

 

later, for broadcast transmission to select “wide”, to output a signal

 

 

 

 

conforming to the standard. Note, however, that “narow” has to be always

 

 

 

 

selected for SDI signals.

 

 

 

 

728

OUTPUT SCH PHASE

 

Set the subcarrier H phase.

 

 

 

 

–512 (–512 (DEC))... 0 (0 (DEC))... 511 (511 (DEC))

 

 

 

 

 

731

WIDE MODE

 

 

Specify whether to record and play back with the addition of wide picture

 

 

 

 

information.

 

Sub-Item

 

 

 

 

 

 

 

 

 

 

 

 

 

OUTPUT

 

 

Select whether to add wide picture information to the signal output when

 

 

 

 

down-converter output is set to squeeze mode.

 

 

 

 

thru (through): Do not add.

 

 

 

 

auto: Add.

 

 

 

 

 

 

 

 

 

Notes

 

 

 

 

 

• To add wide picture information to the output signal, another setting is

 

 

 

 

required in addition to this item. In setup menu item 703, set line 16

 

 

 

 

(59.94i mode (J)), line 20 (59.94i mode (UC)), or line 23(50i mode) to

 

 

 

 

“thru”.

 

 

 

 

• In 59.94i mode (J), output of wide picture information is given priority if

 

 

 

 

the VITC insertion line is set to line 16 in setup menu item 601 or 602.

 

 

 

 

• In 59.94i mode (UC), output of wide picture information is given priority

 

 

 

 

if the VITC insertion line is set to line 20 in setup menu item 601 or 602.

 

 

 

 

740

MASTER LEVEL (HD)

 

Adjust the high-definition video signal output from the HDSDI OUTPUT 1,

 

 

 

 

2 (SUPER) connectors. This adjusts the Y, PB, and PR levels

 

 

 

 

simultaneously.

 

 

 

 

–2048 to 0 to 846

 

 

 

 

 

741

Y LEVEL (HD)

 

 

Adjust the Y level of the high-definition video signal output from the

 

 

 

 

HDSDI OUTPUT 1, 2 (SUPER) connectors.

 

 

 

 

–2048 to 0 to 846

 

 

 

 

742

PB LEVEL (HD)

 

Adjust the PB level of the high-definition video signal output from the

 

 

 

 

HDSDI OUTPUT 1, 2 (SUPER) connectors.

 

 

 

 

–2048 to 0 to 846

 

 

 

 

 

 

Menus 7 Chapter

Setup Menu 103