Menus 7 Chapter

 

 

Menu items in the 700s, relating to video control

 

 

 

 

 

Item number

Item name

Settings

743

PR LEVEL (HD)

Adjust the PR level of the high-definition video signal output from the

 

 

 

HDSDI OUTPUT 1, 2 (SUPER) connectors.

 

 

 

–2048 to 0 to 846

 

 

 

 

 

745

SETUP LEVEL (HD)

Adjust the setup level of the high-definition video signal output from the

 

 

 

HDSDI OUTPUT 1, 2 (SUPER) connectors.

 

 

 

–272 to 0 to 272

 

 

 

 

 

746

SYNC PHASE (HD)

Control the H sync phase of the high-definition video signal output from

 

 

 

the HDSDI OUTPUT 1, 2 (SUPER) connectors.

 

 

 

–128 to 0 to 127

 

 

 

 

 

747

FINE (HD)

Fine control the H sync phase of the high-definition video signal output

 

 

 

from the HDSDI OUTPUT 1, 2 (SUPER) connectors.

 

 

 

0 to 1023

 

 

 

 

 

 

 

Menu items in the 800s, relating to audio control

 

 

 

 

 

Item number

Item name

 

Settings

802

DIGITAL AUDIO MUTING IN

 

Set the audio muting conditions during shuttle playback.

 

SHUTTLE MODE

 

off: Not muted.

 

 

 

 

on: Muted.

 

 

 

 

807

AUDIO OUTPUT PHASE

 

Set the output timing of digital audio playback signals (HDSDI, SDI, AES/

 

 

 

 

EBU only), with 80H as a reference position. Output timing is earlier for

 

 

 

 

values smaller than 80H and later for values greater than 80H. (80H, 128

 

 

 

 

samples = approx. 2.7 ms, 80H, 1 sample = approx. 20 μs)

 

 

 

 

0 (0 (HEX))... 80 (80 (HEX))... FF (FF (HEX)): Values can be set in this

 

 

 

 

range.

 

 

 

 

808

INTERNAL AUDIO SIGNAL

 

Select the operation of the internal audio test signal generator.

 

GENERATOR

 

silnc (silence): Silent signal.

 

 

 

 

1kHz (1kHz sine): 1 kHz, –20 dB FS sine wave signal.

 

 

 

 

When you select SG as the audio input in the input selection section of

 

 

 

 

the control panel, the audio test signal generated by the internal audio

 

 

 

 

test signal generator is input.

 

 

 

 

815

AUDIO SAMPLING RATE

 

Select the mode of operation of the sampling rate converter for AES/

 

CONVERTER

 

EBU input to channels 1 to 4.

 

 

 

 

off: Do not operate.

 

 

 

 

on: Operate.

 

 

 

 

823

NON-AUDIO FLAG PB

 

Control non-audio flags in digital audio output.

 

 

 

 

 

 

Sub-item

 

 

 

 

 

 

 

 

 

1

CH1/CH2

 

During playback (except E-E mode), set non-audio flags in digital audio

 

 

 

 

output to the following states.

 

2

CH3/CH4

 

 

 

on: Set to on (data is non-audio.)

 

 

 

 

 

3

CH5/CH6

 

auto: Set as follows.

 

 

 

 

•

When data is read from disc and confirmed: Follow the data.

 

4

CH7/CH8

 

 

 

•

When data from disc is not confirmed: Maintain current state.

 

 

 

 

 

 

 

 

 

824

ANALOG LINE OUTPUT SELECT

 

Select the analog audio signals (tracks 1 to 8) to be assigned to audio

 

 

 

 

output channels 1 and 2.

 

 

 

 

tr1/2: Tracks 1 and 2 assigned to audio output channels 1 and 2.

 

 

 

 

tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.

 

 

 

 

tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2.

 

 

 

 

tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2.

 

 

 

 

 

 

104 Setup Menu