These are set with PRST/RGN and TCG on page P4 TC of the function menu (see page 41).
DVITC: Lights in the following cases.
•When VITC is read in playback mode. (This has no relations to the display in the time data display area.)
•When VITC recording is possible.
ETime data type: Displays the type of time data displayed in the time data display area. The type of time data is selected with CNTR SEL on the HOME page of the function menu (see page 40).
Display | Type of time data |
TC | Timecode |
|
|
COUNTER | Elapsed recording/playback time |
|
|
UB | User bits |
|
|
VITC | VITC |
|
|
VIUB | VIUB |
|
|
TCG | Timecode generator value |
|
|
UBG | User bits generator value |
|
|
FTime data: Normally displays timecode or VITC, according to the selection made with TCR on page P4 TC of the function menu.
fDisc information
| A Disc loaded indication |
59.94i | B System frequency |
C Video format | |
50Mbps |
|
D Audio format |
ADisc loaded indication: Appears when a disc is loaded in this unit. When no disc is loaded, the usable format is displayed.
The background color of the disc loaded mark indicates one of the following disc states. Blue: Disc capable of recording and playback. Yellow: Disc capable of playback only.
Red: Disc incapable of recording and playback.
Note
Even if the background is blue, recording is not possible in the following cases.
•When a disc with recording inhibited is loaded.
•When REC INH on the HOME page of the function
menu is set to “ON”.
BSystem frequency: Displays the system frequency of
the clips recorded on the disc.
CVideo format: Displays the video format and bitrate of the clips recorded on the disc.
DAudio format: Displays the audio format of the clips recorded on the disc.
gSystem information
| A Power status |
DEFAULT | B Menu setting status |
C Remote interface | |
REPEAT | D Repeat mode |
SHTL/JOG | E Jog/shuttle dial mode |
APower status: Displays the status of the power supply to the unit.
Display | Power status |
| AC power |
|
|
| Battery |
|
|
| Battery almost exhausted: Flashes at 1 Hz |
| Battery exhausted: Flashes at 4 Hz |
|
|
| AC power |
|
|
| Battery |
|
|
| Battery |
|
|
BMenu setting status: Displays the current setting status of setup menu.
Display | Description |
BANK1 | The current menu settings are the same |
| as the settings in menu bank 1. |
|
|
BANK2 | The current menu settings are the same |
| as the settings in menu bank 2. |
|
|
BANK3 | The current menu settings are the same |
| as the settings in menu bank 3. |
|
|
DEFAULT | The current menu settings are the same |
| as the factory defaults. |
|
|
No display | The current menu settings are different |
| from all of the above. |
|
|
CRemote interface: When the remote control switch is set to REMOTE, displays the name of the interface
selected with setup menu item 214 REMOTE INTERFACE.
DRepeat mode: Appears when setup menu item 142
REPEAT MODE is set to “play”.
EJog/shuttle dial mode: Appears when the unit is in shuttle, jog, or variable mode.
hReference signal
This displays the type of reference signal to which this unit is synchronizing.
Parts of Functions and Names 2 Chapter
Front Panel 19