Parts of Functions and Names 2 Chapter

aV/MARK1 button and v/MARK2 button

When the THUMBNAIL indicator (see page 15) is lit, you can use these for thumbnail selection.

During recording or playback, a shot mark 1 or shot mark 2 is recorded as an essence mark when you press the PUSH SET (S.SEL) knob with the V/MARK1 or v/MARK2 button held down.

Use the PDZ-1 Proxy Browsing Software on the supplied XDCAM Application Software CD-ROM to delete and modify essence marks.

Essence marks can also be deleted and modified from the Thumbnail Menu of the chapter thumbnail screen (see page 54).

bIN indicator and OUT indicator

IN indicator: When an In point is set, this lights. If an attempt is made to set the In point after a recorded Out point, this flashes.

OUT indicator: When an Out point is set, this lights. If an attempt is made to set the Out point before a recorded In point, this flashes.

cB/IN button and b/OUT button

When the THUMBNAIL indicator (see page 15) is lit, you can use these for thumbnail selection.

An In or Out point is set when you press the PUSH SET(S.SEL) knob with the B/IN or b/OUT button held down. The In or Out point setting is deleted when you press the RESET/RETURN button with the B/IN or b/ OUT button held down.

3 Shuttle/jog/variable control section

1 SHTL/JOG button

2VAR/JOG button

3 Jog/shuttle transport indicators

SHTL/JOG

VAR/JOG

RESET

RETURN

5Shuttle dial

4Jog dial

For details of playback operations with these buttons and dials, see “Playback operation” on page 48.

aSHTL/JOG button

Press this button, turning it on, to perform shuttle playback with the shuttle dial or jog playback with the jog dial.

bVAR/JOG button

Press this button, turning it on, to perform variable playback with the shuttle dial or jog playback with the jog dial.

cJog/shuttle transport indicators

These show the playback direction in jog, shuttle, or variable speed mode.

b(green): Lights during playback in the reverse direction. B (green): Lights during playback in the forward

direction.

x (red): Lights during still image display.

dJog dial

Turn this for playback in jog mode. Turn clockwise for forward direction playback, and counterclockwise for reverse direction playback. In jog mode, the playback speed varies from –1 to +1 times normal speed, according to the rotation rate of the jog dial. There are no detents. Normally, you press the SHTL/JOG or VAR/JOG button before turning the jog dial, but it is also possible to make a setting to enable jog mode directly by turning the dial (set setup menu item 101 SELECTION FOR SEARCH DIAL ENABLE to “dial”).

eShuttle dial

Turn this for playback in shuttle mode or variable speed mode. Turn clockwise for forward direction playback, and counterclockwise for reverse direction playback.

•In shuttle mode, the playback speed varies in the range ±20 times normal speed, according to the angular position of the shuttle dial.

•In variable speed mode, you can finely adjust the playback speed from –2 to +2 times normal speed, according to the angular position of the shuttle dial.

The shuttle dial has a detent at the center position, for still image playback.

Normally, you press the SHTL/JOG button before turning the shuttle dial, but it is also possible to make a setting to enable shuttle mode directly by turning the dial (set setup menu item 101 SELECTION FOR SEARCH DIAL ENABLE to “dial”).

Note

When setup menu item 101 SELECTION FOR SEARCH DIAL ENABLE is set to “dial”, after using the shuttle dial, return it to the center position. If the shuttle dial is not in the center position, it is possible occasionally for vibration from other operations to activate the dial, and start playback in shuttle mode.

14 Front Panel