•File names and directory names can use letters, numbers, and symbols from the Unicode 2.0 (UTF-8) character set.

However, the following control characters and symbols 1) cannot be used.

-Control characters: U+0000 to U+001F, U+007F

-Symbols: ", *, /, :, <, >, ?, \,

1)The following character codes cannot be used by FAM connections. U+010000, U+020000, U+030000, U+040000, U+050000, U+060000, U+070000, U+080000, U+090000, U+0A0000, U+0B0000, U+0C0000, U+0D0000, U+0E0000, U+0F0000, U+100000

Assigning user-defined clip titles

By default, clips on each disc are assigned names in the range C0001.MXF to C9999.MXF. For this reason, two discs can contain clips with the same names. The automatic title generation function allows you to assign titles to all of the clips on several discs, which facilitates clip management. For example, if the titles TITLE00001 to TITLE00020 are assigned to clips C0001.MXF to C0020.MXF on disc 1, then the titles TITLE00021 to TITLE00037 are assigned to clips C0001.MXF to C0017.MXF on disc 2.

C0020.MXF

C0002.MXF

C0001.MXF

TITLE00020

TITLE00002

TITLE00001

Clips recorded on Disc 1

C0017.MXF

C0002.MXF

C0001.MXF

TITLE00037

TITLE00022

TITLE00021

Clips recorded on Disc 2

Proceed as follows to specify a title and assign it to recorded clips.

1 Press the MENU button.

2 Turn the PUSH SET(S.SEL) knob to select setup menu item 035, and press the knob.

3 Turn the PUSH SET(S.SEL) knob to select “on”, and press the knob.

The clip title naming screen appears.

RETURN

 

 

 

 

 

 

 

 

ITEM-035

 

SELECT

 

CLIP

TITLE

NAMING

 

 

 

 

 

 

 

SELECT

 

 

 

 

 

 

 

*TITLE

-

disable

 

 

 

 

 

 

PREFIX

-

TITLE

 

SAVE

 

 

 

NUMERIC

-

00001

 

 

 

 

 

 

 

EXIT

 

 

 

 

 

 

 

 

 

 

 

SETUP

 

 

 

 

 

 

 

 

 

 

 

4 Turn the PUSH SET(S.SEL) knob to move the asterisk

(*)on the left of the menu items to “TITLE”, and press the knob.

The asterisk indicates the selected item.

5 Turn the PUSH SET(S.SEL) knob to select “enable”, and press the knob.

The automatic title generation function is enabled.

6 Turn the PUSH SET(S.SEL) knob to move the asterisk

(*)on the left of the menu items to the item you want to select, and press the knob.

PREFIX: A string of up to 10 characters. The allowable characters are alphanumeric characters, symbols (! # $ % & ' ( ) + ,- . ; = @ [ ] ^ _ { } ~), and the space character.

NUMERIC: A five-digit number (00001 to 99999) to serve as the initial value of the serial number.

7 Turn the PUSH SET(S.SEL) knob to select the character position to set, and press the knob.

8 Turn the PUSH SET(S.SEL) knob to select the character to set.

9 Repeat steps 7 and 8 as required.

When you are setting the “NUMERIC” item, you can press the RESET/RETURN button to return the initial value of the serial number to 00001 (factory default setting).

10Carry out steps 7 to 9 to set the other item. 11Press the SAVE function (F5) button.

The title is saved.

To check the titles of recorded clips

Press the THUMBNAIL button to display the thumbnail screen, and select the clip whose title you want to check.

Operations File 6 Chapter

Overview 77