Item group | Function | Refer to |
Items | Settings relating to the remote | |
200 to 299 | control interface |
|
|
|
|
Items | Settings relating to editing | |
300 to 399 | operations |
|
|
|
|
Items | Settings relating to preroll | |
400 to 499 |
|
|
|
|
|
Items | Settings relating to disc | |
500 to 599 | protection |
|
|
|
|
Items | Settings relating to the | |
600 to 650 | timecode generator |
|
|
|
|
Items | Settings relating to the | |
651 to 699 | metadata and UMID |
|
|
|
|
Items | Settings relating to video | |
700 to 799 | control |
|
|
|
|
Items | Settings relating to audio | |
800 to 899 | control |
|
|
|
|
Items | Settings relating to digital | |
900 to 999 | processing |
|
|
|
|
Items in the basic menu
The basic menu items (excluding the items related to the digital hours meter) are listed in the following table.
•Item names are the names which appear on the video monitor screen of this unit and an external monitor, when the input signals to the monitor are the video signals output from the COMPOSITE OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2 (SUPER)
connector, or the HDSDI OUTPUT 2 (SUPER) connector.
•An abbreviated name appears in the time data display area when you press the NEXT button.
•The values in the Settings column are the values which appear in the time data display area. (The values may appear in a different format on an external monitor. In this case, the external monitor values are shown in parentheses.) Underlined values are the factory defaults.
Item number | Item name | Settings | ||
001 | PREROLL TIME | 0 s (0 sec)... 5 s (5 sec)... 30 s (30 sec): Set the preroll time to between 0 | ||
|
|
|
|
|
|
| and 30 seconds in steps of 1 second. | ||
|
| A preroll time of at least 5 seconds is recommended when using this | ||
|
| unit for editing. | ||
|
|
| ||
002 | CHARACTER | Adjust the horizontal screen position (as a hexadecimal value) of the text | ||
|
| information output from the COMPOSITE OUTPUT 2 (SUPER) connector, | ||
|
| the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2 | ||
|
| (SUPER) connector for superimposed display on the monitor. | ||
|
| 00... 0C ...28: The hexadecimal value 00 is for the far left of the screen. | ||
|
| Increasing the value moves the position of the characters to the right. | ||
|
| Set this item by adjusting to the required position while viewing the monitor. | ||
|
|
| ||
003 | CHARACTER | Adjust the vertical screen position (as a hexadecimal value) of the text | ||
|
| information output from the COMPOSITE OUTPUT 2 (SUPER) connector, | ||
|
| the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2 | ||
|
| (SUPER) connector for superimposed display on the monitor. | ||
|
| 00... 2A ...32: The hexadecimal value 00 is for the top of the screen. | ||
|
| Increasing the value lowers the position of the characters. | ||
|
| Set this item by adjusting to the required position while viewing the monitor. | ||
|
|
|
|
|
Menus 7 Chapter
Setup Menu 91