Maintenance Menu
Items in the maintenance menu
The following tables show the items in the maintenance menu.
•Item names are the names which appear on the video monitor of this unit and an external monitor to which the output of the COMPOSITE OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2 (SUPER) connector is input. An abbreviated name appears in the time data display area when you press the NEXT button.
•The values in the Settings columns are the values which appear in the time data display area. (The values may appear in a different format on an external monitor. In
this case, the external monitor values are shown in parentheses.) Underlined values are the factory defaults.
This manual does not explain the menu items in M0: CHECK, M1: ADJUST, M2: SERVICE SUPPORT, and M6: DRIVE. Refer to the Maintenance Manual for an explanation of these items.
Refer to the Maintenance Manual for more detailed information about the menu items in M3:OTHERS, M4:SETUP MAINTENANCE, and M5:NETWORK.
Menus 7 Chapter
|
| M3: OTHERS: Other setting items | ||
|
|
|
|
|
Item |
|
| Setting | |
M30: SOFTWARE VERSION |
| Display of the software version of this unit | ||
|
| |||
M31: SERIAL NUMBER | Display and correction of the serial number of this unit | |||
|
|
| ||
M36: HOURS METER RESET |
| Display and reset of the hours meter and the thread counter | ||
|
|
|
| |
M37: AUDIO | M370: METER HEAD |
| Select the audio reference level (headroom). | |
CONFIG | ROOM |
| 20dB, 18dB, 16dB, 12dB, EBUL | |
|
|
|
| |
|
|
| Note |
|
|
|
| EBUL | can be selected only when the system frequency is 50i. |
|
|
|
| |
| M372: |
| Select whether to handle digital audio signals as | |
| INPUT |
| recording. | |
|
|
| Audio (audio): Handle as linear PCM audio signals. | |
|
| |||
|
| data: Handle as | ||
|
|
| ||
| 1 Tr1/Tr2 |
|
|
|
|
|
|
|
|
| 2 Tr3/Tr4 |
|
|
|
|
|
|
|
|
| 3 Tr5/Tr6 |
|
|
|
|
|
|
|
|
| 4 Tr7/Tr8 |
|
|
|
|
|
|
| |
| M373: INPUT LEVEL |
| Set the upper limit for the signal level input to audio channels 1/3 or 2/4. | |
|
|
| +4dB, 0dB, | |
|
| |||
|
|
|
| |
|
|
|
|
|
| 1 CH1/CH2 |
|
|
|
|
| Note |
| |
|
|
|
| |
| 2 CH3/CH4 |
| EBUL | can be selected only when the system frequency is 50i. |
|
|
|
| |
| M377: OUTPUT LEVEL |
| Set the reference level for audio output signals. | |
|
|
| +4dB, 0dB, | |
|
|
|
|
|
|
|
| Note | |
|
|
| EBUL | can be selected only when the system frequency is 50i. |
|
|
|
| |
M38: | M380: HOME2 |
| Assign a function menu item to page HOME2 of the function menu as a user | |
CONFIG |
|
| setting. | |
|
|
|
| |
| M381: PAGE7 ASSIGN |
| Assign a setup menu item to page P7 of the function menu as a user setting. | |
|
|
|
| |
| M382: PAGE7 NAME |
| Specify the name of a setup menu item assigned with M381: PAGE7 ASSIGN. | |
|
|
|
| |
| M38F: |
| Save the settings of M380 to M382. | |
| CONTROL |
|
|
|
|
|
|
|
|
108 Maintenance Menu