Menus 7 Chapter

 

Menu items in the 100s, relating to the control panels

 

 

 

 

Item number

Item name

Settings

131

AUDIO VOLUME

Select whether each of the CH-1/ALL CH, CH-2 to CH-4 adjustment

 

 

knobs on the control panel is effective to control the audio recording level

 

 

and playback level on each channel or the CH-1/ALL CH adjustment

 

 

knob alone functions as a master control to control the audio level on all

 

 

channels together.

 

 

each: Each of the CH-1/ALL CH, CH-2 to CH-4 adjustment knobs is

 

 

effective to control each channel.

 

 

all: The CH-1/ALL CH adjustment knob alone functions as a master

 

 

control.

 

 

When “all” is selected, the ALL CH indicator under the CH-1/ALL CH

 

 

adjustment knob lights up.

 

 

 

 

140

AREA MARKER

Select whether to display the display area of SD output on the color LCD.

 

 

off: Do not display.

 

 

on: Display.

 

 

 

 

142

REPEAT MODE

Put the unit into repeat playback mode, or exit from repeat playback

 

 

mode.

 

 

off: Exits from repeat playback mode.

 

 

play: Puts the unit into repeat playback mode.

 

 

 

 

143

INDEX PICTURE POSITION

Select the frame of the clip to use as the thumbnail image (index picture)

 

 

when recording.

 

 

0sec to 10sec: Can be set in the range from 0 seconds (first frame of the

 

 

clip) to10 seconds, in units of 1 second.

 

 

 

 

 

Menu items in the 200s, relating to the remote control interface

 

 

 

 

 

Item number

Item name

Settings

201

PARA RUN

Select whether to use synchronized operation for two or more VTRs.

 

 

dis (disable): No synchronized operationena

 

 

ena (enable): Use synchronized operation

 

 

 

 

 

 

Note

 

 

 

 

To use

synchronized operation for two or more VTRs, set item 201 to ena

 

 

on all of the VTRs.

 

 

 

 

214

REMOTE INTERFACE

When the remote control switch is set to REMOTE, select the device from

 

 

which to remote-control this unit.

 

 

9PIN: Device connected to the REMOTE(9P) connector.

 

 

SDI: Device connected to the HDSDI INPUT connector.

 

 

 

 

257

NETWORK ENABLE

Select the remote control switch positions which enable network

 

 

connections.

 

 

net (network): Only when the switch is set to “NET”.

 

 

n&9P (network & remote(9PIN)): When the switch is set to “NET”, and

 

 

when the switch is set to “REMOTE” and setup menu item 214 is set

 

 

to “9PIN”. a)

 

 

a) FTP connections can be made only when the device connected to the REMOTE(9P)

 

 

connector (D-sub 9 pin) is in stop mode. During FTP connections, the device connected

 

 

to the REMOTE(9P) connector cannot be used to control this unit.

 

 

 

 

 

Menu items in the 300s, relating to editing operations

 

 

 

 

Item number

Item name

Settings

 

301

VAR SPEED RANGE FOR

Select the playback speed range when carrying out playback in variable

 

 

SYNCHRONIZATION

speed mode from a remote control unit connected to the REMOTE(9P)

 

 

 

connector.

 

 

 

–2~+2: –2 to +2 times normal speed.

 

 

 

wide: –2.20 to +2.20 times normal speed.

 

 

 

 

 

320

DIGITAL AUDIO PB PROCESS ON

Select the treatment of audio playback at edit points.

 

 

EDIT POINT

cut: Carry out a cut (possibly resulting in audio discontinuities at the edit

 

 

 

point).

 

 

 

fade: Fade out and fade in.

 

 

 

 

 

 

98 Setup Menu