Menus 7 Chapter
ITEM - 005
DISPLAY INFORMATION
SELECT
time data & CNT
Current setting
3 Use the PUSH SET(S.SEL) knob or the +/– function button (F3 or F4) to change the setting.
4 To change other settings, press the PUSH SET(S.SEL) knob or the SELECT function button (F2) to return to the previous screen, then repeat steps 1 to 3.
5 When you have completed the settings, press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video monitor display, and “Saving...” appears in the time data display area, while the new settings are saved in memory. When the saving operation is completed, the video monitor display and the time data display area return to their normal indications.
Notes
•If you power off the unit before a save operation is completed, settings may be lost. Wait until the save is completed before powering off the unit.
•If, instead of pressing the SAVE function button (F5), you press the MENU button, the new settings are not saved. The message “ABORT !” appears on the video monitor display and “Abort !” in the time data display area for about 0.5 seconds, and the system exits the menus. To change more than one setting, be sure to press the SAVE function button (F5) after making the settings.
To return menu settings to their factory default settings
After changing menu settings, use the following procedure to return the settings to their factory default settings (setting initialization).
To return a particular setting to its factory default setting
In the screen that selects the setting of that item, press the RESET/RETURN button.
For example, proceed as follows to return the 005 DISPLAY INFORMATION SELECT item to its default setting. This assumes that the setting has been changed from the factory default “time data & status” in step 3 of the procedure in “To change the settings of menu items” (page 95).
1 Press the RESET/RETURN button.
“time data & status” (factory default setting) is selected.
2 Press the PUSH SET(S.SEL) knob.
The setting returned to its factory default is saved in memory as the current setting.
To return all settings to their factory default settings
1 Press the MENU button to display the setup menu.
2 Press the RESET/RETURN button.
A message appears, to confirm whether you wish to return all settings to their factory default settings.
Message on the video | Initialize all items to factory |
monitor display | preset values? |
|
|
Message in the time data | Init setup? |
display area |
|
|
|
3 Press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video monitor display, and “Saving...” appears in the time data display area, while the settings of all items are returned to their factory default settings. These factory default settings are saved in memory. If you power off the unit while settings are being saved, settings may not be correctly returned to their factory default settings. Wait until the saving is completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SAVE function button (F5), press the RESET/RETURN button. The display returns to the top level of the setup menu, leaving the settings unchanged.
Items in the extended menu
The following tables show the items in the extended menu.
96 Setup Menu