Screens GUI in Operations 5 Chapter
To delete the In point or Out point
Press the RESET/RETURN button with the B/IN or b/OUT button held down.
3 With the SHIFT button held down, press the PUSH SET(S.SEL) knob.
A sub clip with the range specified in steps 1 and 2 is added to the end of the clip list.
When you specify a range that spans several clips
Sub clips are generated for each of the clips in the range.
To check the newly added sub clips
You can check the newly added sub clips by displaying the clip list thumbnail screen.
4 Repeat steps 1 to 3 as required to add more sub clips.
5 Save the clip list (see page 69).
To reorder sub clips
See page 58 for more information about thumbnail screen operations.
1 In the clip list thumbnail screen, select the thumbnails of the sub clips that you want to move (multiple selections possible).
2 Display the Thumbnail Menu.
3 Select Move Sub Clips, and then press the PUSH SET(S.SEL) knob.
The Clip List (Move) screen appears.
[
Clip List (Move) |
|
|
| 006 |
| 001/034 | |||||
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
TC 00:00:00:00 |
| TC 00:00:21:27 |
|
| TC 00:04:06:00 | TC 00:04:13:14 | |||||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
TC 00:04:35:12 |
| TC 00:04:57:10 |
|
| TC 00:05:19:08 | TC 00:05:41:05 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TC 00:06:03:03 |
| TC 00:06:25:00 |
|
| TC 00:06:46:27 | TC 00:07:08:25 | |||||
DATE&TIME 08 AUG 2007 11:50 | TOTAL DUR | 00:13:48:24 |
| ||||||||
4 Move the I cursor to the point where you want to move the selected thumbnails.
5 Press the PUSH SET(S.SEL) knob.
The sub clips are moved to the I cursor position.
6 Repeat steps 1 to 5 as required.
7 Save the clip list (see page 69).
To adjust the In and Out points of sub clips (trim)
Proceed as follows to define the range of a scene by changing the positions of the In and Out points.
See page 58 for more information about thumbnail screen operations.
1
2
3 Select Trim Sub Clip, and then press the PUSH SET(S.SEL) knob.
The Clip List (Trim) screen appears.
Clip List (Trim) | 001/034 |
Total 00:13:48:24
DUR 00:00:21:27
IN
01:17:33:08
OUT
01:17:55:05
TCR 01:17:33:08 CLIP 019/035 | OK |
Cancel
Like the clip playback screen, this screen allows you to play and search all clips on the disc.
To display a list of In and Out point operations that you can perform
Press the MENU button.
4 When you find the point that you want to make the start point, select “IN” and then press the PUSH SET(S.SEL) knob.
The timecode of the new In point appears in the timecode display, and the Total (total duration) and DUR (clip duration) displays are updated.
5 When you find the point that you want to make the end point, select “OUT” and then press the PUSH SET(S.SEL) knob.
The timecode of the new Out point appears in the timecode display, and the Total (total duration) and DUR (clip duration) displays are updated.
To cue up the In point or Out point
Display the Thumbnail Menu, select Cue up Inpoint or Cue up Outpoint, and then press the PUSH SET(S.SEL) knob.
68 Scene Selection (Clip List Editing)