Meanings of indications on the menu screen
Meaning | |
Pressing the PUSH SET(S.SEL) | |
(c) at the right of a | knob or the b/OUT button switches |
menu item | to the next lower menu level or to a |
| setting selection screen. |
|
|
Pressing the PUSH SET(S.SEL) | |
at the left of a menu | knob or the B/IN button switches to |
item | the previous (higher) menu level. |
|
|
Character string at the | Current setting of the menu item |
right of a menu item | When shown with a colon (:): the |
| current setting is the same as |
| the factory default setting. |
| When shown with a raised dot |
| (.): the current setting is |
| different from the factory |
| default setting. |
|
|
An * (asterisk) in a | Factory default setting |
complete list of settings |
|
|
|
To change a menu item setting
Carry out the following operations to change the setting.
For information about how to change network settings see next section “To change network settings”.
Function buttons |
|
|
| Arrow buttons | ||||
|
|
| PUSH SET(S.SEL) knob |
| ||||
|
|
|
|
|
|
|
| EJECT |
ACCESS |
|
|
|
|
| PUSH SET(S.SEL) | MARK1 | |
|
|
|
|
| IN | OUT | ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| MENU | MARK2 |
| ALL CH |
|
|
|
|
| SHTL/JOG | |
|
|
|
|
|
| VAR/JOG | ||
|
|
|
|
|
| |||
|
|
|
|
|
|
| RESET |
|
|
|
| CHAPTER |
|
|
| RETURN |
|
|
|
|
|
|
|
|
| |
|
|
| EXPAND |
|
|
|
|
|
| VARIABLE KEY INHI |
|
|
|
|
|
| |
NET | REC | ON | PAGE |
|
|
|
|
|
LOCAL | PRE- |
|
|
|
|
|
|
|
REMOTE | SET | OFF | HOME |
|
|
|
|
|
PB |
|
|
|
|
|
| ||
| PHONES | LEVEL | DISPLAY PREV | PLAY NEXT | STOP | REC THUMBNAIL |
| |
|
|
| SHIFT |
|
|
| SUB CLIP |
|
|
|
| TOP F REV | F FWD END | STANDBY | REC INHI | DISC MENU |
|
|
|
|
|
| ||||
|
|
| SHIFT button |
|
|
| ||
PAGE/HOME button |
| MENU button | ||||||
1 Use the PUSH SET(S.SEL) knob or the V/MARK1 and v/MARK2 buttons to select the required item, then press the PUSH SET(S.SEL) knob or the SELECT function button (F2).
The
2 Select a
3 Press the PUSH SET(S.SEL) knob or the SELECT function button (F2) to confirm the setting change.
4 Press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video monitor display, and “Saving...” appears in the time data display area, while the new settings are saved in memory. When the saving operation is completed, the video monitor display and the time data display area return to their normal indications.
To cancel changing a setting
Before pressing the SAVE function button (F5), press the MENU button.
The menu disappears from the video monitor display, without saving the new setting.
To change network settings
To change network settings, carry out the procedure described in the previous section, “To display the maintenance menu”, to display the NETWORK menu item, then carry out the following operations.
For details of the settings, consult your network administrator.
When the IP address is assigned automatically
Note
Check that the network cable is connected to this unit before carrying out the operation.
Follow the procedure as shown in previous section “To change a menu item setting” to set maintenance menu item M5: NETWORK >M50: DHCP to “ENABLE”.
To check the assigned IP address
Select maintenance menu item M5: NETWORK
>M51: IP ADDRESS PRESET.
Note
If the IP address cannot be assigned, this is shown as “000.000.000.000.” In this case, consult the network administrator.
To set the IP address
First set DHCP to “DISABLE” (see the previous section, “When the IP address is assigned automatically”).
1 Select maintenance menu item M5: NETWORK >M51: IP ADDRESS PRESET.
2 Press the PUSH SET(S.SEL) knob.
The IP address appears, and the digit that can be changed flashes.
Menus 7 Chapter
Maintenance Menu 111