When a disc is inserted
Alarm message in time | Alarm message in video monitor screen | Description/action |
data display area |
|
|
Unknown FS! | UNKNOWN FILE SYSTEM. | Format the disc, or eject it (see page 72). |
| PLEASE FORMAT DISC OR EJECT. |
|
|
|
|
No FS! | NO FILE SYSTEM.PLEASE EJECT DISC. | Eject the disc. |
|
|
|
ILL. Disc! | IRREGULAR DISC IS USED. | Use a Professional Disc. |
| USE PROFESSIONAL DISC. |
|
|
|
|
| IRREGULAR DISC IS USED. |
|
| PLEASE EJECT DISC. |
|
|
|
|
Salvage NG! | CLIP SALVAGE WAS NOT COMPLETED. | |
|
| |
|
|
|
Salvage XXXX | DISC CANNOT BE RECORDED. | See “Handling of discs when recording does not end |
| FORMAT DISC OR CONTACT SERVICE | normally (salvage functions)” (page 47). |
| TO RUN CLIP SALVAGE PROGRAM. |
|
| (XXXX) |
|
|
|
|
Over DUR! | EXCESSIVE DURATION IS IN DISC. | Data in excess of the rated capacity is recorded on |
| RECORDING AND PLAYBACK IS NOT | the disc. |
| POSSIBLE. |
|
|
|
|
No Support! | FORMAT NOT SUPPORTED. | A disc in an unsupported recording format is loaded. |
| RECORDING AND PLAYBACK IS NOT | Use a disc formatted in the MPEG HD422 format. |
| POSSIBLE. |
|
|
|
|
ILL. Index! | INDEX FILE ERROR. | Format the disc, or eject it (see page 72). |
| PLEASE FORMAT DISC OR EJECT. |
|
|
|
|
Formatting! | AUTO FORMATTING IS EXECUTING. | Wait until the format has been completed and try |
|
| again. |
|
|
|
FORMAT NG! | AUTO FORMATTING WAS NOT | Eject the disc and insert it again, or insert another |
| COMPLETED. | disc. |
|
|
|
DI read err | CANNOT READ DISC INFORMATION. |
|
| PLEASE EJECT DISC. |
|
Read err |
| |
|
| |
|
|
|
DRV ADJ err | CANNOT PERFORM AUTO DRIVE |
|
| ADJUSTMENT. |
|
|
|
|
During front panel operations
Alarm message in time | Alarm message in video monitor screen | Description/action |
|
|
|
| |||
| ||||
| ||||
data display area |
|
|
|
|
|
|
|
| |
|
|
|
| |
|
|
| Appendix | |
KEY INHI.! a) | KEY INHIBIT MODE IS SELECTED. | This appears when the KEY INHI switch is “on”. |
| |
| SET KEY INHIBIT SWITCH TO OFF. | Set the KEY INHI switch “off”. |
|
|
|
|
|
|
|
REMOTE! a) | REMOTE MODE IS SELECTED. | Set the remote control switch to “LOCAL”. |
|
|
| SET REMOTE/LOCAL/NETWORK |
|
|
|
| SWITCH TO LOCAL. |
|
|
|
|
|
|
|
|
No Disc! a) | NO DISC. | Insert a disc and try again. |
|
|
Troubleshooting 117