Recording Continuous
Timecode With FAM and
FTP Connections
When you are connected to the unit by FAM or FTP, you can create new clips with timecode that is continuous with the timecode of the last frame of the last clip on the disc. To record continuous timecode, set TCG on page P4 TC of the function menu to “INT”, and set PRST/RGN to “TC”. Then proceed as follows.
Note
Continuous timecode cannot be recorded if PRST/RGN on page P4 TC of the function menu is set to “VITC”.
See “Extended menu operations” (page 106) for more information.
FAM connection
Write clip files to the unit from the computer or other device that is connected to this unit.
FTP connection
Use the “STOR” command to transfer clip files from the computer that is connected to this unit.
If you issue the “SITE UMMD” command immediately before the “STOR” command, the original timecode of the transferred file is recorded, regardless of the setting of TCG on page P4 TC of the function menu.
Operations File 6 Chapter
Recording Continuous Timecode With FAM and FTP Connections 89