MAINTENANCE | MENU |
M0: CHECK | p |
M1:ADJUST
M2:SERVICE SUPPORT
M3:OTHERS
M4:SETUP MAINENANCE
M5:NETWORK
M6:DRIVE
2 Turn the PUSH SET(S.SEL) knob to select “M4 SETUP MAINTENANCE”, then press the PUSH SET(S.SEL) knob or the SELECT function button (F2).
The
MAINTENANCE MENU
M4: SETUP MAINTENANCE
P M4 0:EXTEND MENU: dis p
M4 0:CUSTOMIZE : dis
M4 6:MENU DATA CONTROL
M4 7:SETUP BANK4
M4 8:AUTO RECALL: off
M4 9:RESET ALL SETUP
3 Turn the PUSH SET(S.SEL) knob to select “M40 EXTENDED MENU”, then press the PUSH SET(S.SEL) knob or the SELECT function button (F2).
The setting screen for M40: EXTENDED MENU appears.
| MAINTENANCE MENU | |
M4: SETUP MAINTENANCE | ||
| M4 0:EXTEND MENU: | dis |
P | * DISABLE | p |
| ENABLE |
|
|
|
|
4 Turn the PUSH SET(S.SEL) knob to select “ENABLE”, and press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video monitor display, and “Saving...” appears in the time data display area, while the new settings are saved in memory. When the saving operation is completed, the video monitor display and the time data display area return to their normal indications.
When you next display the menu and change the item display, the extended menu will appear after the basic menu.
Menus 7 Chapter
Setup Menu 107