6Camera/CCU function ON/OFF buttons

Various functions of the video camera or the CCU/HDCU can be turned ON and OFF from this panel.

The following switching functions are assigned to seven of the buttons at the factory and the rightmost button is reserved for future use.

Press and light up these buttons to turn ON the respective functions.

Press again so that the buttons go dark to turn OFF the functions.

5600K: 5600K electric color temperature conversion function

AUTO KNEE: Auto knee function. When this button is lit (ON), the knee point is automatically adjusted according to the light content of the picture.

SKIN DETAIL: Skin tone detail function

DETAIL GATE: Skin tone detail gate function. When this button is lit (ON), the adjustment range of the skin tone detail is displayed in white on the monitor screen.

SAT: Saturation function

BLACK GAMMA: Black gamma function

CHARACTER: Self-diagnostic display function. When this button is lit (ON), the contents of the self- diagnosis of the CCU/HDCU is displayed on a monitor connected to the CHARACTER OUTPUT connector of the CCU/HDCU.

The contents are also mixed to the video signal to be output from the PIX1 OUTPUT connector.

Each time you press this button, the display changes as follows:

The contents of the self-diagnosis may be displayed when required even if this button is not lit.

7Paint control block

aLCD panel

Shows adjustment items and other information.

bCLEAR button

Press and hold for more than 1 second to clear the manually adjusted settings of the selected items and resume the standard settings (which can be defined by the user).

cENTER button

Press to select or confirm menu and adjustment items, etc.

dPaint controls (rotary encoders)

Adjust the value of the selected paint adjustment item.

eMENU UP/DOWN button

Used for moving between menu pages. Press the v button to go back one page and the V button to go to the next page.

8Scene file control block

aSCENE FILES buttons

While the STORE button is flashing: When you press one of these buttons, the current setting data is stored as a file of the corresponding number.

While the STORE button is out: The stored data can be retrieved by pressing and lighting up the button of the desired number. Press the lit button to turn it dark and resume the previous status.

50 Location and Function of Parts