2Turn the right adjustment knob to change the setting, and press ENTER button.

The preview output setting is changed.

5 Press CLEAR button.

The first screen of the RCP configuration menu reappears.

2Turn the right adjustment knob to change the setting, and press ENTER button.

¯

The brightness is set.

¯

5 Press CLEAR button.

The first screen of the RCP configuration menu reappears.

To adjust LED brightness

You can adjust the brightness of buttons and the LEDs in the tally indication window on the RCP-920/921.

1 Move the cursor to SETTING in the RCP configuration menu, and press ENTER button.

The settings and adjustment screens appear.

2 Use the v and V buttons to move through the settings and adjustment screens, and display the <LED BRIGHTNESS> page.

¯

3 Turn the right adjustment knob to move the cursor to the item you want to configure.

The items you can configure are as follows. SWITCH/LED: Adjusts the brightness for the button

LEDs and the OPT and ALARM indicators. TALLY: Adjusts the brightness for the LEDs in the

camera number/tally indication window. 7SEGMENT: Adjusts the brightness for the LED

number displays of the ND/CC filter, MASTER GAIN, IRIS, and MASTER BLACK indicators.

4 Set the brightness for each LED.

1Press ENTER button to enable configuration. The cursor appears as “?” and the setting flashes.

To adjust the buzzer volume

When a call signal is received on the RCP-920/921 or the panel is operated, the buzzer will emit a sound. You can adjust the buzzer volume as necessary.

1 Move the cursor to SETTING in the RCP configuration menu, and press ENTER button.

The settings and adjustment screens appear.

2 Use the v and V buttons to move through the settings and adjustment screens, and display the <BUZZER VOLUME> page.

3 Turn the right adjustment knob to move the cursor to the item you want to configure.

The items you can configure are as follows. SWITCH: Adjusts the buzzer volume for when the

buttons on the operation panel are pressed. CALL: Adjusts the buzzer volume for when call

signals are received.

4 Set the buzzer volume for each item.

1Press ENTER button to enable configuration. The cursor appears as “?” and the setting flashes.

2Turn the right adjustment knob to change the setting, and press ENTER button.

68 Initial Settings