Initial Settings

Configuring the RCP-920/921 Operating Environment

The RCP configuration menu allows you to configure settings on the RCP-920/921 such as the internal clock, buzzer volume, and LED and LCD brightness.

3 Press ENTER button to enable configuration.

The cursor appears as “?” and the selected item flashes.

4 Turn the right adjustment knob to change the setting item.

To adjust the LCD

You can adjust the brightness and contrast for the menu display panel.

1 Move the cursor to LCD SETTING in the RCP configuration menu, and press ENTER button.

The LCD settings screen appears.

2 Turn the left adjustment knob to adjust the brightness, and turn the right adjustment knob to adjust the contrast.

3 Press CLEAR button.

The first screen of the RCP configuration menu reappears.

To customize the paint menu

You can select up to eight setting items to appear in the paint menu.

1 Move the cursor to MENU CUSTOMIZE in the RCP configuration menu, and press ENTER button.

The paint menu customization screen appears.

2 Turn the right adjustment knob to move the cursor to the item you want to change.

5 Press ENTER button to confirm the selection.

The cursor appears as “>” again.

6 Repeat steps 2 to 5 for each paint menu item you want to change.

7 Press CLEAR button.

The first screen of the RCP configuration menu reappears.

To set the clock

The RCP-920/921 has an internal clock. Perform the following steps to set the clock.

1 Move the cursor to SETTING in the RCP configuration menu, and press ENTER button.

The settings and adjustment screens appear.

2 Use the v and V buttons to move through the settings and adjustment screens, and display the <DATE/ TIME> page.

Note

The LCD can only display up to four setting items at one time. If a page has more than four items, turn the right adjustment knob to scroll the page.

¯

¯ ¯

¨©

Initial Settings 65