4
5
3 Turn the right adjustment knob to change the | 3 Turn the right adjustment knob to select MCS, and | ||||||||||
setting, and press ENTER button. |
| press ENTER button. | |||||||||
The second section of the IP address flashes. Set |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| |||||
this section of the IP address as you did above. |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The CNS mode is set. | |||
4 Enter the entire IP address, and press ENTER |
|
|
|
| ||||
|
|
|
| |||||
|
|
|
| |||||
| button. |
|
| ¯ |
| |||
| The target IP address is set. |
|
|
|
| |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |||
|
|
|
| 2 Set the master IP address. | ||||
|
|
|
| The | ||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
Save the system connection settings. | Client) is automatically set to CLIENT. | |||||||
You must set the IP address of the master device when | ||||||||
|
|
|
| |||||
1 Turn the right adjustment knob to move the cursor | configuring a client device in a | |||||||
| to SET in the upper right of the screen. | 1 Turn the right adjustment knob to move the cursor | ||||||
|
|
|
| |||||
2 Press ENTER button to enable configuration. |
| to MASTER IP ADDRESS. | ||||||
| The cursor appears as “?.” | 2 Press ENTER button to enable configuration. | ||||||
|
|
|
| |||||
3 Press ENTER button again to save the settings. |
| The cursor appears as “?” and the first section of | ||||||
|
|
|
|
| the IP address flashes. | |||
Press CLEAR button. | 3 Turn the right adjustment knob to change the | |||||||
|
|
|
| |||||
The first screen of the RCP configuration menu |
| setting, and press ENTER button. | ||||||
reappears. |
| The second section of the IP address flashes. Set | ||||||
|
|
|
|
| this section of the IP address as you did above. |
Use MCS mode for systems that include multiple connected CCUs, cameras, and panels such as the MSU and RCP.
Configure the submode as follows to determine functioning.
1 Set the camera network system mode (CNS MODE) to MCS.
1Turn the right adjustment knob to move the cursor to CNS MODE.
2Press ENTER button to enable configuration. The cursor appears as “?” and the setting flashes.
¯
4Enter the entire IP address, and press ENTER button.
The master IP address is set.
¯
3 Save the system connection settings.
1Turn the right adjustment knob to move the cursor to SET in the upper right of the screen.
Initial Settings 73