4 Press ENTER button to enable configuration.

The cursor appears as “?” and the setting flashes.

5 Turn the right adjustment knob to change the setting item.

6 Press ENTER button to confirm the selection.

The cursor appears as “>” again.

7 Repeat steps 3 to 6 for each switch you want to configure.

8 Press CLEAR button.

The first screen of the RCP configuration menu reappears.

Use the supplied function labels to relabel each switch for which the function has been changed.

To reset the settings in the RCP configuration menu

You can reset all the settings in the RCP configuration menu to their default configurations.

Note

This setting can only be configured in Engineer mode.

1 Move the cursor to SETTING in the RCP configuration menu, and press ENTER button.

The settings and adjustment screens appear.

2 Use the v and V buttons to move through the settings and adjustment screens, and display the <ALL RESET> page.

1Press ENTER button to enable configuration. The cursor appears as “?” and the START? display flashes.

2Press ENTER button again.

OK appears, and all the settings are reset.

To cancel resetting, press CLEAR button when START? is displayed.

Note

The resetting procedure is complete when OK appears, and all the settings in the RCP configuration menu will be set to their factory default configurations.

4 Press CLEAR button.

The first screen of the RCP configuration menu reappears.

To change adjustment knob sensitivity

You can adjust the sensitivity of the WHITE, BLACK/ FLARE, DETAIL, and BLACK GAMMA adjustment knobs when they are used in Relative mode.

Note

This setting can only be configured in Engineer mode.

1 Move the cursor to SETTING in the RCP configuration menu, and press ENTER button.

The settings and adjustment screens appear.

2 Use the v and V buttons to move through the settings and adjustment screens, and display the <VR REL MODE SET> page.

Note

The LCD can only display up to four setting items at one time. If a page has more than four items, turn the right adjustment knob to scroll the page.

¯

¯

¯

¯

3 Reset the settings.

70 Initial Settings