3 Turn the right adjustment knob to move the cursor to
TIME ZONE.
¯
¯ ¯
¨©
4 Set the time zone.
1Press ENTER button to enable configuration. The cursor appears as “?” and the selected time zone flashes.
2Turn the right adjustment knob to change the time zone, and press ENTER button.
The time zone is set.
¯
¯ ¯
¨©
5 Set the date.
1Turn the right adjustment knob to move the cursor to DATE.
2Press ENTER button to enable configuration. The cursor appears as “?” and the year setting flashes.
3Turn the right adjustment knob to change the year setting, and press ENTER button.
The month setting flashes.
4Turn the right adjustment knob to change the month setting, and press ENTER button. The day setting flashes.
5Turn the right adjustment knob to change the day setting, and press ENTER button.
The date is set.
¯
¯ ¯
¨©
6 Set the time.
1Turn the right adjustment knob to move the cursor to TIME.
2Press ENTER button to enable configuration. The cursor appears as “?” and the hour setting flashes.
3Turn the right adjustment knob to change the hour setting, and press ENTER button.
The minute setting flashes.
4Turn the right adjustment knob to change the minute setting, and press ENTER button. The time is set.
¯
¯ ¯
¨©
7 Save the date and time settings.
1Turn the right adjustment knob to move the cursor to SET in the upper right of the screen.
2Press ENTER button to enable configuration. The cursor appears as “?.”
3Press ENTER button again to save the settings.
¯
¯ ¯
¨©
8 Press CLEAR button.
The first screen of the RCP configuration menu reappears.
To change the shutter display to an angle valueYou can change settings on the
1 Move the cursor to SETTING in the RCP configuration menu, and press ENTER button.
The settings and adjustment screens appear.
2 Use the v and V buttons to move through the settings and adjustment screens, and display the <Shutter Display> page.
3 Change the shutter display setting.
1Press ENTER button to enable configuration. The cursor appears as “?” and the setting flashes.
66 Initial Settings