Menu Configuration and Basic Operation
The
Basic operation
In the factory default condition, the first page of the paint menu appears on the LCD panel when power is supplied. During subsequent use, the last used menu page will appear.
For information on how to switch from and to other menu pages, see “Menu transition diagram” (page 59).
Paint menu1 Display the menu.
The paint menu appears when power is supplied.
To call up other paint menu pages, press v or V on the MENU UP/DOWN button in the paint control block.
2 Set or adjust the item.
Turn the paint control for the respective setting to adjust the value (or select a setting).
Note
In the following cases, some items cannot be operated from the paint menu.
Button status | Unavailable items |
ABSOLUTE button: Lit | WHITE |
| COLOR TEMP |
| DETAIL LEVEL |
|
|
ABSOLUTE button: Lit | BLACK |
FLARE button: Out |
|
|
|
ABSOLUTE button: Lit | FLARE |
FLARE button: Lit |
|
|
|
ABSOLUTE button: Lit | DETAIL LEVEL |
SD button: Out1) |
|
ABSOLUTE button: Lit | SD DETAIL LEVEL |
SD button: Lit1) |
|
1)Only when an SD function is assigned to either of the spare buttons. You can assign an SD function to the spare button in the SW ASSIGN menu of the configuration menu.
1 Display the configuration menu.
Press the ENTER button once to go to the top page of the paint menu.
Press the ENTER button again and hold it for at least 1 second. The top page of the configuration menu appears.
2 Go to the page with the item to be set.
Turn the right paint control to move the cursor to the setting or adjustment item that you want to set, and press the ENTER button. A display for the respective setting appears. Use the v and V buttons as required to move between pages.
3 Select the item.
Turn the paint control to move the cursor to the item and press the ENTER button. The cursor shape becomes “?.”
4 Set or adjust the item.
Turn the right paint control to adjust the value (or select a setting), and press the ENTER button. The change becomes active, and the cursor shape returns to “>.”
Note
For pages which contain a “SET” item, any changes on the page will not become active until confirmed by the setting procedure. To do this, move the cursor to “SET” and press the ENTER button twice.
56 Menu Configuration and Basic Operation