Each time the SET key is pressed, the Label keys change as follows.
“CLOCK” appears and flashes on one of the Label keys on the display.
3Press the CLOCK key.
The Commander enters clock setting mode.
“CLOCK” appears on the Mode Display key, and the current time flashes.
To select STD TIME (standard time) or DS TIME (daylight saving time)
When the Commander enters the clock setting mode when the clock is already set, the time mode previously set (STD TIME or DS TIME) stays lit and the other time mode flashes, and the setting mode goes to Step 4.
If you want to change the time mode, press the flashing key (STD TIME or DS TIME). The selected STD TIME or DS TIME key lights, and the setting mode goes to Step 4. If you do not want to change the time mode, press the 
or 
button. The setting mode goes to Step 4.
When the time mode is changed from STD TIME to DS TIME
The time of the clock returns by one hour.
When the time mode is changed from DS TIME to STD TIME
The time of the clock advances by one hour.
4To set the clock, follow Steps 2 - 5 on page
Note
If you press the SET key in Step 3 or 4, the clock is set then. The clock starts from 0 second.
11