![](/images/backgrounds/187814/187814-10447x1.png)
If you keep COMMANDER OFF pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF pressed for less than 2 seconds
The Commander returns to the previously set mode.
To clear the learned function of the Component Select button
1Follow Steps 2 and 3 on page 20 in “Learning Function.”
2While pressing the DEL key, press the Component Select button which you want to clear.
Notes
•You can program a signal by “learning” for a Component Select button or a Label key for which the
•You cannot program a System Control function (page 38) for a Component Select button or a Label key for which a signal has been programmed by “learning.”
•You can program the
Assigning Other Components to the Component Select Buttons or the Label Keys
Copying the settings of a Component Select button or a Label key to another button or key
You can copy the entire settings of a Component Select button or a Label key to another Component Select button or a Label key. The settings of the component code (page 12), the channel macro function (page 58), the learned functions (page 19) and character contents are copied to a new button or key.
Notes
•You cannot copy the settings to a Component Select button or a Label key for which any learning function or channel macro function has been programmed. (“NG” flashes.)
•The character contents are overwritten to a new button or key.
2
3
4,5
TV | STB | VCR | DVD | CD | AMP | OTHER |
|
| SYSTEM CONTROL | TIMER | LIGHT | COMMANDER | 6 | ||
| OFF | ||||||
1 |
| 2 | 3 | MORE |
|
| 1 |
|
|
|
| VOLUME | CHANNEL |
| |
|
| OK |
|
|
|
|
|
MENU |
|
| EXIT | MUTING | RECALL |
|
Continued 47