To check the execution of the timer program or set the timer program to the standby mode
1Follow Steps 1 - 3 on page 61, 62.
2Press the TEST key or the ON/ OFF key.
TEST: You can check the timer program setting by transmitting the Timer Macro signals.
ON/OFF: The display turns as below.
With a beep sound, “ON” appears, and the Commander enters the timer standby mode. The display returns to Step 2 on page 61.
To reset the timer standby mode, press the ON/OFF key again.
3Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF pressed for less than 2 seconds
The Commander returns to the previous setting mode.
Continued 67