SymptomRemedy
The display of the Commander turns off by itself.
Eis displayed only when transferring the data and lighting the LCD display window.
•This Commander is preset at the factory to turn the display off automatically if you do not operate for more than 10 minutes. You can change the
•The batteries begin to be exhausted. Replace the batteries as early as possible (page 7).
The Commander enters the clock setting mode by itself.
“LOCK” is displayed on the LCD and the display for operation does not appear when you press a button.
•The batteries might have been replaced, or the batteries are worn out. Replace the batteries with new ones (page 7). After replacing the batteries, the set contents remain. So, to use the Commander with the previous set contents, you should only set the clock (page 8).
•The Hold function is on. Unlock the Hold function (page 71).
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the Remote Commander to work properly, call the Sony Customer Support Helpline at
87