Setting the Timer (continued)
To switch quickly the timer standby mode to on or off using the TIMER button
1Press the TIMER button.
The program numbers of which timer program is set to the standby mode stay lit, and the other program numbers flash on the Label keys.
To change the Label keys, press the TIMER button repeatedly.
2Select the program number of which timer standby mode you want to switch to on by pressing the Label key.
If you select the program number which has no timer program data, the “NG” sound is heard and “NG” flashes twice.
3Press the ON OFF key.
With a beep sound, “c” mark lights and the standby mode of the selected timer program is set to on. The display returns to Step 1.
4Keep COMMANDER OFF pressed for more than 2 seconds to turn the Commander off.
To reset the standby mode to off, follow Steps 1 - 3 again.
Notes
•If the TEST key or the ON/OFF key is pressed when the timer program is not set, the “NG” sound is heard twice and “NG” flashes.
•When you finish the timer setting mode after you set the timer standby mode, “c” mark stays lit beside the clock. This means that one or more timer programs are set to the timer standby mode.
•The timer program contents you have set on this Commander repeat every week until you set the timer standby mode to OFF (weekly timer). If you want to execute the timer program once, set the timer standby mode to OFF after the execution of the timer program.
IMPORTANT
The timer function of this Commander is designed for the timer operation of AV components. Do not use the timer function to operate an
68