Executing a Series of Commands
—System Control Functions (continued)
If you press the NO key
The display returns to Step 4.
While erasing, “c c” stays lit. When erasing finishes, “OK” is displayed with a beep sound.
7Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF pressed for less than 2 seconds
The Commander returns to the previous setting mode.
To erase all programmed commands for all SYSTEM CONTROL buttons and corresponding Label keys
1Follow Steps 1 - 3 in the left.
36
2While pressing the DEL key, press the SYSTEM key.
SYSTEM
3Press the YES key.
YES
“REALLY?” stays lit, and “YES” and “NO” flash.
If you press the NO key
The display returns to Step 1.
4Press the YES key.
YES
While erasing, “c c c c” stays lit. When all settings programmed for the Component Select buttons and corresponding Label keys are erased, “OK” is displayed with a beep sound.