To change the function display of a key
You can select the most suitable function display among all the displays the key has, and set it to the key.
1After Step 4 (page 20), while pressing the Mode Display key (in this case, VCR), press the key you want to teach repeatedly.
VCR 
Each time the key is pressed, the display is changed in order.
2When the desired display appears, release the Mode Display key.
3Then follow Steps 6 to 8 (page 21).
Notes
•You can change the display of a key only when you program it using the learning function. If you want to change the display of the key that has learned a signal, clear the signal first (page 25). Then teach the key again using the above procedure to change its display.
•If you don’t change the display of a key, the default display is used.
•You cannot change the display of the area of the numeric keys 1 to 9.
To change the name of the Label key
You can change the display of the Label key to the most suitable name using up to 8 characters or digits.
1After Step 4 (page 20), hold the Label key of which name you want to change (for example, COUNTER) pressed for more than 2 seconds.
COUNTER
The Commander enters the Label Input mode.
Continued 23