Executing a Series of Commands

—System Control Functions (continued)

Example: To program the procedure on page 31 for the TV button

Programming a series of commands for the Component Select buttons or the Label keys

As with the SYSTEM CONTROL buttons or the Label keys, you can also program a series of operating commands for the Component Select buttons (up to 32 steps). To execute the commands programmed on a Component Select button or a Label key by the System Control function, press the button or key for more than 2 seconds. The component macro executing time is variable by changing the setting (page 42).

Notes

•The programmed commands are executed when you press a Component Select button or a Label key for more than 2 seconds. When you press the button or the Label key for less than 2 seconds, it works as the normal Component Select button or key, and the corresponding touch-keys are displayed.

•See also “About the interval between operation steps” on page 34 and “Notes on System Control Operations” on page 37.

1Follow Steps 1 and 2 on page 32.

If a series of commands is already programmed for that button

The programmed operations are displayed in order. To program a new series of operations, clear the program first (page 39).

2Press the Component Select button for which you want to program a series of commands.

TV

The selected component name appears on the Mode Display key. Other component names are displayed on the Label keys.

You can select the Label key for programming a series of commands by pressing the desired Label key. To change the component names of the Label keys, press the OTHER button repeatedly. Each time you press the OTHER button, the display of the Label keys changes as in Step 4 on page 13.

3Follow Steps 4 to 7 on pages 33.

38