Example: To set up a Philips’ TV

1See the tables in the supplied “Component Code Numbers,” and find the four-digit code number for the desired component.

If more than one code number is listed, use the number that is listed first.

For example, to set up a Philips ’TV, you would use the code number 8056. The first digit of the component code number means the component category (TV, VCR, etc.). For further details, see the tables in the supplied “Component Code Numbers.”

2While pressing COMMANDER OFF, press MUTING.

COMMANDER

MUTING

OFF

 

“SET” appears on the Mode Display key.

4Select the desired component by pressing the Component Select button or the Label key.

TV

To change the Label keys, press the OTHER button repeatedly. Each time you press the OTHER button, the display of the Label keys changes as follows.

When the desired component is selected, the component name previously preset to the Component Select button or the Label key (in this case, TV), and the four-digit component code number previously set to the component are displayed. “0” - “9,” “ENTER,” “CLEAR” and “POWER” flash.

3Press the PRESET key.

“PRESET” appears on the Mode Display key.

Continued 13