Adding an Extra Function to the Component Select Buttons (continued)

To clear the Power-on command

Repeat the procedure above. The following display appears.

4Press the PowerON key.

PowerON

“PowerON” appears on the Mode Display key.

The display of the component names (preset by Sony) for which you can program the Power-on signal flashes. The display of the other components stays lit.

5Select the desired component by pressing the Component Select button or the Label key. (To change the Label keys, press the OTHER button repeatedly.)

TV

The selected component name appears on the Mode display key and “POWER ON” appears on the display with a beep sound.

6Press COMMANDER OFF.

COMMANDER

OFF

If you keep COMMANDER OFF pressed for more than 2 seconds

The Commander turns off.

If you keep COMMANDER OFF pressed for less than 2 seconds

The Commander returns to the previous setting mode.

44