Setting the Automatic-Off Time of the Display Window (continued)

6Press the (+) or (–) key to change the Automatic-Off time of the LCD display window.

You can adjust from 1 minute to 30 minutes.

Each time the (+) key is pressed, the minute increases by one.

Each time the (–) key is pressed, the minute decreases by one.

For example, “2min” on the Label key means 2 minutes.

Note

When you set the Automatic-Off time of the display window longer than 10 minutes (factory setting), the battery life may be short.

7Press COMMANDER OFF.

COMMANDER

OFF

If you keep COMMANDER OFF pressed for more than 2 seconds

The Commander turns off.

If you keep COMMANDER OFF pressed for less than 2 seconds

The Commander returns to the previous setting mode.

Adjusting the Backlight of the Display Window

The Commander is preset at the factory to brighten backlight, and to switch off the backlight automatically if you do not operate for more than 10 seconds. To change this setting, perform the following procedure.

You can adjust the backlight Automatic- Off time (from 1 second to 60 seconds in the units of 1 second), the brightness (bright or dim) and the setting of the buttons to lighten the Display Window.

 

 

 

 

 

 

 

2

3

 

 

 

 

 

 

4-9

TV

STB

VCR

DVD

CD

AMP

OTHER

 

 

SYSTEM CONTROL

TIMER

LIGHT

COMMANDER

10

 

 

 

 

OFF

1

 

2

3

MORE

 

 

 

 

 

 

 

VOLUME

CHANNEL

 

 

 

OK

 

 

 

 

 

MENU

 

 

EXIT

MUTING

RECALL

 

1

1While pressing COMMANDER OFF, press MUTING.

COMMANDER

MUTING

OFF

 

“SET” appears on the Mode Display key.

74